Operative Mode - CD Automation Revo TC 2ph User Manual

CD Automation srl

10 Operative Mode

Description:
In operating mode, parameters can be viewed and modified in the present state of the device: to access
the programming procedure, press the F U N C button and release it within 3 seconds.
The lower display shows the ID of the current group, while the upper display shows the string "Edt"
permanently: the ▲ and ▼ buttons let you select the group to change, and allows the F U N C key to
enter the selected group.
For each parameter in the group selected, the lower display shows the ID parameter as the upper display
shows the current value: to switch to other parameters of the group acts on the ▲ and ▼.
Pressing the F U NC enter into modification of the displayed parameter (the upper display starts
flashing).
With the ▲ and ▼ changing the current value displayed on the bottom.
Press the F U N C key to store the value currently displayed, pressing the MAN you exit without saving
changes the new value.
For a list of parameters, see Chapter <Programming procedure>
pag. 23 di 122