Indicators; Possible Outputs Revo Tcm (Temperature Controller Only); Possible Outputs Revo Tc (Ssr + Temperature Controller) - CD Automation Revo TC 2ph User Manual

CD Automation srl

9.1 Indicators

LED1
LED2
LED3
LED4
LED5
LED6
The Led 1, 2, 3 o 4 , if assigned to the status of the alarm 3, take the following feature:
If the alarm 3 is in OFF state and also alarms Breakdown, leakage or loop-break are in OFF state
the assigned LEDs are off
If the alarm 3 is in ON state and also alarms breakdown, leakage or loop-break are in OFF state
the assigned LEDs are On
If the alarm 3 is in OFF state and one or more of the alarm of breakdown, leakage or di loop-
break are in ON state, the assigned LEDs flashes every 1 second.
If the alarm 3 is in ON state and one or more of the alarm of breakdown, leakage or loop-break
are in ON state, the assigned LEDs flashes every 0.5 seconds.

9.2 Possible outputs REVO TCM (Temperature Controller only)

RELAY
Uscita
TC07-02
OUT1
OUT2
OUT3
OUT4
"-" = Not available

9.3 Possible outputs REVO TC (SSR + Temperature Controller)

RELAY
Uscita
TC07-02
OUT1
OUT2
OUT3
OUT4
"-" = Not available
Switched on when the output 1 is ON state.
Switched on when the output 2 is ON state.
Switched on when the output 3 is ON state.
Switched on when the output 4 is ON state.
Flashing when the function tune is working and in calculating mode.
Flashing when the function adaptive is working.
SSR
TC07-03
X X
X X
X X
X X
SSR
TC07-03
- Fixed
X -
X -
Fixed -
Analogic DI Input
TC07-01 TC07-05
X -
- -
X X
- X
Analogic DI Input
TC07-01 TC07-05
- -
- -
-- X
- -
pag. 22 di 122
Input/Output
TC07-04
-
-
X
X
Input/Output
TC07-04
-
-
-
-