Fuji Xerox DocuPrint P285 dw Online User's Manual page 243

Level 1 Level 2
Wi-Fi Direct Device Info.
Status Info.
I/F Enable
NFC -
Network -
Reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
For wired network models
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default -
Wired Enable
Network Reset Network Reset
Level 3 Level 4
SSID -
IP Address -
Status
-
Signal -
Channel -
Speed -
- -
- -
- -
Level 3 Level 4
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS Config -
WINS Server Primary
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
- -
- -
-
- -
- -
Descriptions
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Display the channel in use when the Status is
G/O Active or Client Active.
Display the connection speed when the Status
is G/O Active or Client Active.
Enable or disable the Wi-Fi Direct connection.
Turn the NFC function on or off.
Restore all network settings of your machine to
the factory settings.
Descriptions
Choose the IP method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS
server.
server.
Allocate the IP address from the link-local
address range automatically
Enable or disable the IPv6 protocol.
Choose the Ethernet link mode.
Display the Ethernet link status.
Display the MAC address of the machine.
Restore wired network settings of your machine
to the factory settings.
Turn the wired interface on or off.
Restore all network settings of your machine to
the factory settings.
1
.
239