Travis Industries 864 Cleanface TRV GSR2 Owner's Manual page 19

Glass Frame Removal and Installation (continued)
The latch can come loose from the latch assembly. This occurs only when it is rotated. Follow the
directions below to re-install the latch if it comes loose.
Hold the latch at an angle and insert it into the slot on the glass frame anchor.
Glass Frame
Anchor
Note how the washer on the latch fits behind the flange on the
glass frame anchor.
Once fully inserted, turn the latch until it is upright.
© Travis Industries
Maintenance
Latch
NOTE: this slot may be at a
different angle than illustrated.
Top of
Firebox
4140220
19
100-01348