Econo Operation - Daikin FTKR35UV16W Operation Manual

� ECONO Operation
P"'DAIKIN
s®S8a�
* �
0
I
itcf11�i
•c
'B
l,i'J:]a --·· ·
,t il
,go
@ @
ONI HR.OFFI HR.
J
( l [
· □
)
bJ L
L
j
·
(� ECON�• ;
8
C)C)
C)C)
go
□
C)
NOTE
■
Notes on ECONO operation
• ECONO operation can only be set when the unit is running. PressinglowoFF)causes the settings to be cancelled, and"�"
disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit.
• ECONO operation functions in COOL and DRY operation.
• POWER CHILL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the power consumption level is already low, switching to ECONO operation will not reduce the power consumption.
• This operation is performed with lower power and therefore may not provide a sufficient cooling effect.
13
ECONO operation enables efficient operation by limiting the maximum
power consumption.
This function is useful to prevent the circuit breaker from tripping when the unit
operates alongside other appliances on the same circuit.
■
To start operation
1. Press during operation.
� ECON�
• " � " is displayed on the LCD.
■
To cancel operation
1. Press � ECON� again.
• " � " disappears from the LCD.
[Example]
Normal operation
I
9
• In case the air conditioner and other appliances • The maximum power consumption of the air
which require high power consumption are
used at the same, a circuit breaker may trip if
the air conditioner operates with its maximum
capacity.

ECONO operation

11c===c========,------�---�:;--7
conditioner is limited by using ECONO operation.
The circuit breaker will hardly trip even if the air
conditioner and other appliances are used at
same time.