Table of Contents
Advertisement
� Adjusting the Temperature
P"'DAIKIN
®i®SB
�
��
.B· c
r•0�
t!'1J
��ct �c<:�
'B
'8
il
,t
li'11ia --···
°
©
©
ON I
HR. OFF I
HR.
l [
(
)
J l
[
)
J
l
) [
□
}L___J
· · r3 • · r--....
{ TEMP
\
V
•
•
♦-
C)C)
C)C)
go
□
C)
NOTE
■
Recommended temperature setting
°
• For cooling: 26-28
■
Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period turn off the circuit breaker.
• Operation outside the humidity or temperature range described in the table may cause a safety device to disable the system.
Operating conditions
Mode
COOL
Outdoor temperature: 20 -54
Indoor temperature: 18-3 2
DRY
Indoor humidity: 8 0 % max.
■
Tips for saving energy
• Be careful not to cool the room too much. Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain. Blocking sunlight and air from outdoors increases the cooling effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
■ Adjusting the temperature
■ To change the temperature setting
[ r @ P ] .
1. Pre ss
• Press £. to raise the temperature and press T to lower the temperature.
COOL operation
°
18-32
C
❖ Default Set Temperature Setting :
• As per BEE regulation, whenever Air Conditioner will be switched ON from the
remote, the default set temperature will be set as mentioned in below table :
Set temeerature before
Mode
remote switched OFF
If Set temperature < 24 • C Default set temperature will be 24 • C.
Cool
If Set temperature >= 24 • C
Note:
Whenever AC is switched OFF in dry mode and is switched ON from remote, air
conditioner will start in Cool mode and then DRY mode selection can be done using
the MODE button.
C
°
• A safety device may activate to stop the operation.
C
°
• Dew may form on the indoor unit and drip from it when COOL or DRY operation
C
is selected.
DRY or FAN operation
The temperature setting
cannot be changed.
Set temperature after remote switched ON
Default set temperature will remain same
as set prior to remote switched OFF.
If operation is continued out of this range
8
Advertisement
Table of Contents
