Table of Contents
Advertisement
IIJI LED/ 7 S EGMENT BRIGHTNESS
� Control Operation
. .
�
• •
: •
A
• L___)
: TEMP :
0
• •
•
:
•
V
NOTE
• "Ld" indicates for the brightness (Light) feature which is appeared on set temperature area.
• Remote will be in High Brightness Intensity by default whenever batteries inserted.
• Keep this in mind that If user sets LED lights to be in "OFF" state (using Brightness control feature) and if Power failure
occurs then when power will resume LED will remain in OFF state (needs to reset LED Brightness Control again)
21
The brightness of the indicator lamp/ 7 Segment can be adjusted H(high),
L(low), or OFF.
To set the brightness setting mode.
■
Press(caSWJ N aj for more than 5 seconds.
L d
•
is displayed on the LCD.
Press [ r @ P ] will show the last memory setting of brightness
■
intensity of indicator lamp/ 7 Segment.
Again Press [ r @ P ] to adjust the brightness to the indicator lamp/ 7
■
Segment.
-�L
_ d_l
___ lldl __ l lldl
HI
H (High)
■
Press
for more than 5 seconds again to exit from the
� ; N aj
brightn
setting mode or when the remote controller is left
untouched for 60 seconds, it returns to the normal mode
automatically.
�
�
L (Low)
OFF
Advertisement
Table of Contents
