Cancel Button - Samsung ML-1710P User Manual

LED

Cancel button

Function
Printing demo page
Manual feeding
Cleaning inside
printer
Canceling print job
Toner Save mode
on/off
If the On Line/Error and Toner Save LEDs blink, your
system has some problems. To solve the problem, see
"Troubleshooting Error Messages" on page 6.18.
In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
Press this button each time you load a sheet of paper in the
manual feeder, when you select Manual Feed for Source
from your software application. For detailed information,
see "Using the Manual Feeder" on page 3.8.
In Ready mode, press and hold this button for about 10
seconds until all LEDs turn on, and release. After cleaning
the printer, one cleaning sheet is printed.
Press this button during printing. The On Line/Error LED
blinks while the print job is cleared from both the printer
and the computer, and then return to Ready mode. This
may take some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by
pressing this button. For detailed information, see "Using
the Manual Feeder" on page 3.8.
In Ready mode, press this button to turn the Toner Save
mode on or off.
For detailed information, see page 4.8.
Description
Description
I 1.7
NTRODUCTION
1