Cancel Button - Samsung ML-2010 User Manual

LED

Cancel button

Function
Printing demo page
Manual feeding
Canceling print job
Toner Save mode
on/off
If you press the Cancel button in Ready mode, this LED is on
and the Toner Save mode is enabled.
If you press this button once again, this LED is off and the
Toner Save mode is disabled.
If the On Line/Error and Toner Save LEDs blink, your
system has some problems.
To solve the problem, see "Troubleshooting Error Messages"
on page 5.17
In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
Press this button each time you load a sheet of paper in the
Manual tray, when you select Manual Feed for Source
from your software application.
For detailed information, see "Using the Manual Tray" on
page 3.7.
Press this button during printing. The On Line/Error LED
blinks while the print job is cleared from both the printer
and the computer, and then return to Ready mode. This
may take some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by
pressing this button.
For detailed information, see "Using the Manual Tray" on
page 3.7.
In Ready mode, press this button to turn the Toner Save
mode on or off.
For detailed information, see Software User's Guide and
page 4.5.
Description
Description
I 1.7
NTRODUCTION
1