Understanding The Control Panel; On-Line/Error Led; Cancel Button - Samsung ML-2245 Series User Manual

UNDERSTANDING THE CONTROL PANEL

The color of the status and toner LED indicates the machine's current
status.

On-Line/Error LED

STATUS
Green On The machine is warming up or ready to receive the
data.
Blinking The machine is printing data.
Red On • The machine is experiencing an error, such as
open cover, paper empty, replace imaging unit,
installer error, or invalid error.
• The machine is experiencing a service required
error, such as LSU error, or fuser error. Contact
your sales or service representative.
Blinking The imaging unit is almost exhausted, replace the
imaging unit soon.
Orange On The machine is experiencing an error such as
jammed paper.
Toner LED
STATUS
Red On The toner is exhausted, machine will stop
printing. Replace the toner cartridge.
Blinking The toner is low, replace the toner soon.
Rapidly The toner is empty, replace the toner.
blinking
]
All printing errors will be appear in the
14 _Introduction
DESCRIPTION
DESCRIPTION
Smart Panel program window.

Cancel button

STATUS
Printing demo page
Canceling print job
Manual print
DESCRIPTION
In ready mode, press and hold this
button until the On-Line/Error LED
blinks, and release.
Press this button during printing.
The red LED blinks while the print
job is cleared from both the machine
and the computer, and then the
machine returns to ready mode.
This may take some time depending
on the size of the print job.
Press this button during printing.
The On-Line/Error LED blinks
while the print job is cleared from
both the machine and the computer,
and then return to ready mode. This
may take some time depending on
the size of the print job.
In Manual Feed mode, you can't
cancel the print job by pressing this
button.