Advertisement
Do not mount a motor on any of these kayaks.
• You product is made of the highest quality materials and comply
with NMMA (National Marine Manufacturers Association)
regulations. Altering the construction of these products will void
the limited warranty and could jeopardize the safety of
the occupants.
• If your product has been used in salt water, rinse it off with fresh
water as soon as possible.
• Remove tar spots or other soiled areas by using a mild soap and
rinsing with fresh water.
• Be sure your product is completely dry before storing.
• The products may be stored in ated, but do not place any heavy
or sharp objects on it. Storage is best in a dry room.
REPAIRING SMALL PUNCTURES
For inadvertent punctures, you can repair them with the included
Sevylor
repair patch.
®
INSTRUCTIONS:
1. Thoroughly clean and dry the damaged area. Completely de ate
if an in atable article.
2. Cut a portion of the patch to cover the puncture, and allow an
additional ¼" on all sides. Always cut a round or oval patch.
Never leave corners.
3. Be sure the spot is completely dry.
4. Peel the backing from the patch.
5. Adhere the patch to the puncture.
6. Using your thumb or nger apply even pressure across the entire
surface of the patch.
MOTOR MOUNTING
CAUTION!
CARE & STORAGE:
14
Advertisement
