•
Follow all local boating regulations and navigation rules.
Familiarize yourself with boating conditions where you plan to
use the boat. Use common sense and caution when operating in
unfamiliar places.
•
Observe the maximum weight the boat can carry and do not
overload past this limit. Over-loading jeopardizes the safety of the
occupants.
•
Be sure all accessories and/or equipment (e.g. oars, life jackets)
are in proper working condition before using the boat. Each
person occupying the boat is to wear an approved Personal
Flotation Device (life preserver).
•
Sharp objects are not to be carried in the boat without adequate
protection or storage.
•
When navigating the boat in any water depth, watch for
submerged or sharp objects that may damage or pierce the
boat's air chambers.
•
Enter the boat from the port (left) or starboard (right) sides - not
from the fore (front) or aft (back) sides.
•
Never tow with a boat or any other vehicle.
Do not mount a motor on any boat that exceeds the Maximum
Horsepower Rating for your specific boat model.
All Sevylor
boats that have a Horsepower Rating can accept the
®
Sevylor
12V Trolling Motor, Model 2000004144 without purchasing
®
any additional mounting hardware. Refer to 12V Trolling Motor
mounting instructions.
Mounting any motor other than the Sevylor
Model 2000004144, requires the Sevylor
2000004146, which is sold separately.
•
These boats are made of the highest quality materials. Altering
the construction of these boats will void the limited warranty and
could jeopardize the safety of the occupants.
•
If your boat has been used in salt water, rinse it off with fresh
water as soon as possible.
•
Remove tar spots or other soiled areas by using a mild soap and
rinsing with fresh water.
•
Be sure your boat is completely dry before storing.
•
The boats may be stored inflated, but do not place any heavy or
sharp objects on it. Storage is best in a dry room.
OPERATING INSTRUCTIONS:
MOTOR MOUNTING
WARNING!
CARE & STORAGE:
12V Trolling Motor,
®
Motor Mount Kit, Model
®
7