Summary of Contents for Sevylor Fish Hunter Series
Page 1
® I NFLATABLE BOATS Including the following Model Series: Fish Hunter™, Super Caravelle, Caravelle, Colossus™ and HUI READ THE FOLLOWING INSTRUCTIONS AND WARNINGS TO AVOID DROWNING OR SERIOUS INJURY WARNING: • Not a life saving device. • Not for use by children without adult supervision. •...
Page 2
IMPORTANT INFORMATION The warnings below relate to various situations. Please observe them. CAUTION! Denotes a imminent hazard which will result in severe injury if you do not comply with the instructions. WARNING! Reminds you of safety measures which must be observed. Also denotes unsafe practices which could result in personal injury or damage to the product or property, if you do not comply with the instructions.
WARNING! Never use a compressor, CO or compressed air to inflate the boat. Do not let your boat come into contact with sharp, pointed objects. To inflate using any Sevylor QuickPump™ unit: ® To begin inflation, Attach adapter hose...
Note: To inflate the mini double lock valve, which is used on some of the Sevylor boat floors and seat bottoms, follow the same inflation instructions above, using the mini double lock valve adapter. The mini Double Lock™...
Page 5
4 Person Boat 600 lbs. Caravelle 5 Pers. or 900 lbs. 3.0 * 0.9 PSI 0.9 PSI 5 Person Boat 800 lbs. * Requires 2000004146 Motor Mount Kit (sold separately) for motors other than Sevylor 12 Volt Motor, Model 2000004144...
Page 6
1.5 PSI N / A Person Boat 800 lbs. * Requires 2000004146 Motor Mount Kit (sold separately) for motors other than Sevylor 12 Volt Motor, Model 2000004144 WARNING! Do not exceed the certified maximum capacities under any circumstances! NMMA (ABYC...
SEVYTEST™ GAUGE Some of the Sevylor products are equipped with a Sevytest™ ® gauge. The Sevytest™ device is a pressure gauge, not an infl ation gauge. The Sevytest™ gauge is found on the side wall, inside the main chamber(s). The purpose is to show you when to let some air out after the pressure has increased due to temperature change.
OPERATING INSTRUCTIONS: • Follow all local boating regulations and navigation rules. Familiarize yourself with boating conditions where you plan to use the boat. Use common sense and caution when operating in unfamiliar places. • Observe the maximum weight the boat can carry and do not overload past this limit.
Sevylor 12V Trolling Motor, Model 2000004144 without purchasing ® any additional mounting hardware. Refer to 12V Trolling Motor mounting instructions. Mounting any motor other than the Sevylor 12V Trolling Motor, ® Model 2000004144, requires the Sevylor Motor Mount Kit, Model ®...
Page 10
Caravelle Models 5 PERSON Fittings for Motor Mount Carry Inflated Floor Handle Fittings for 12V Motor DIN Safety Chamber 4 Oar locks Grab Line Double as Handles 4 PERSON Fittings for Motor Mount Carry Inflated Floor Handle Fittings for 12V Motor 4 Oar locks DIN Safety Chamber...
Page 11
Super Caravelle Models 6 PERSON Fittings for Motor Inflatable Seat Mount Carry Inflatable Seat Handle Fittings for 12V Motor Grab Line ® DIN Safety Chamber 4 Patented Delrin Exterior Tunnel Chambers Swivel Oar Locks 4 PERSON Fittings for Motor Mount Carry Inflatable Seat Handle...
Page 12
™ Models Colossus 4 PERSON 4 Air Front Chambers Handle Grab Line 8 Rope Holders with Oar Storage Clips 4 Oar Locks 3 PERSON Front 4 Air Handle Chambers Grab Line 8 Rope Holders with Oar 2 Oar Locks Storage Clips 2 PERSON Front 3 Air...
Page 13
™ Models Fish Hunter 6 PERSON Oar Holders Inflatable Seat Fishing Rod Holder Front Fittings for 12V Carry Motor Handle Fittings for Motor Carry Mount Handle Rear Fittings for 12V Motor Grab Line Inflatable Seat Exterior Tunnel Chambers Gear Bag Battery 4 Swivel Oar Fishing Rod Holder...
Page 14
HUI Models HUI 400 DIN Safety Chamber Carry Handle Inflated Floor- 2 Chambers Grab Line Main Chamber 4 Oar Locks HUI 200 DIN Safety Chamber Grab Line Inflated Floor- 2 2 Oar Locks Chambers Main Chamber HUI 100 DIN Safety Chamber 2 Oar Locks Inflated Floor- 2 Chambers...
GRAB LINE INSTALLATION: IMPORTANT: To properly install the inflatable boat’s grab line, first inflate the boat. Feed the grab line through the eyelets on each of the rope holders. Then tie the two loose ends in a square knot at the rear of the boat.
Page 16
REPAIRING SMALL PUNCTURES Inadvertent punctures can be repaired using 3 different methods described below. (included with select models Included “Sticky Back Repair Patch” only) 1. Thoroughly clean and dry the damaged area. Completely deflate the product. 2. Cut a portion of the patch to cover the puncture and allow an additional ¼”...
Page 17
The Sevylor AirSeal is another repair option for repairing small punctures, in inflatable products such as pool floats, small boats, air mattresses and rainwear. The Sevylor AirSeal can also be used as the vinyl glue, for the vinyl patch noted in the above section. Refer to the repair instructions included with the Sevylor AirSeal.