Advertisement
Quick Links
HVLP AIR CAP AND FLUID NOZZLE CHART
MODEL
AIR CAPS
NO.
23-1008
23-1010
23-1012
23-1013
J300H
23-1014
23-1015
23-1017
23-1019
23-1022
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Note: Air cap test gages are available to confirm HVLP compliance.
*Gun inlet pressures may vary as required by application
**When using optional gun regulator, inlet pressure changes to 45psi
Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708
*MAX GUN
FAN
INLET PRESS.
CONTROL
FOR HVLP
40**
40**
40**
40**
60-1502 (#2)
40**
40**
40**
40**
40**
www.spraycat.com
Jaguar 300H
Jaguar 300H
Jaguar 300H
Jaguar 300H
Jaguar 300H
GRAVITY FEED SPRAY GUN
SCFM @
AIR CAP
MAX GUN
RING
INLET
13.5
33-0208 0.8mm (.022")
13.5
33-0210 1.0mm (.040")
13.5
33-0212 1.2mm (.046")
13.5
33-0213 1.3mm (.052")
Included
13.5
33-0214 1.4mm (.055")
13.5
33-0215 1.5mm (.059")
13.5
33-0217 1.7mm (.070")
13.5
33-0219 1.9mm (.075")
13.5
33-0222 2.2mm (.086")
PRODUCT INFORMATION
AVAILABLE FLUID
NOZZLES TIPS
marking on needle
NEEDLES /
40-1308 (308)
40-1310 (310)
40-1312 (312)
40-1313 (313)
40-1314 (314)
40-1315 (315)
40-1317 (317)
40-1319 (319)
40-1322 (322)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for C.A. Technologies Jaguar 300H
Summary of Contents for C.A. Technologies Jaguar 300H
- Page 1 Jaguar 300H Jaguar 300H Jaguar 300H Jaguar 300H Jaguar 300H GRAVITY FEED SPRAY GUN PRODUCT INFORMATION HVLP AIR CAP AND FLUID NOZZLE CHART *MAX GUN SCFM @ MODEL AIR CAP AVAILABLE FLUID NEEDLES / AIR CAPS INLET PRESS. MAX GUN...
- Page 2 J300H J300H J300H J300H J300H Operation and Maintenance Instructions for Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Screw the paint cup onto the gun’s gravity feed fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”.
- Page 3 HVLP AIR CAP TEST GAGES 23-1008-G 23-1010-G 23-1012-G 23-1013-G J300H 23-1014-G GUNS 23-1015-G 23-1017-G 23-1019-G 23-1022-G ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION See Air Cap Chart Air Cap** 60-2101 Trigger See Air Cap Chart Fluid Tip** 60-1520 Air Valve Assembly 33-1201...
- Page 4 FLUID NOZZLE / AIR CAP SELECTION CHARTS JAGUAR Series 300H - Gravity Feed Guns J300H HVLP SPRAY GUN FLUID ORIFICE x MAXIMUM MATERIAL TYPE AIR CAP PATTERN WIDTH Very Thin less than 16 sec. Zahn #2 1.0 mm x 1010 13.5 inks , dyes, solvents, stains...
Need help?
Do you have a question about the Jaguar 300H and is the answer not in the manual?
Questions and answers