Table of Contents
Advertisement
C O N F I G U R I N G M A X P R O N V R
4
Configuring MAXPRO NVR
Configuring MAXPRO NVR
The configuration process involves the following tasks.
Note:
To go to the Configurator tab
1.
Caution:
2.
3.
Note:
Note:
4.
66
•
Configuring the web client settings.
•
Configuring the Honeywell cameras with MAXPRO NVR Wizard.
•
Configuring the system level settings.
•
Configuring the disk management settings.
•
Configuring the cameras.
•
Configuring the schedule based recording for cameras.
•
Performing user administration.
An easy way to configure the MAXPRO NVR system is using the MAXPRO NVR
Wizard, which is a 3-step procedure to live video. Refer to the
Operator's Guide
for more information.
Double-click the
icon on your desktop. The MAXPRO NVR Log On dialog box
appears.
Only on the Honeywell provided systems, a default Windows user,
Administrator and password Password1 is already configured and
hence you are automatically logged in.
Type the Username. The default user name is "admin".
Type your Password. The default password is "trinity".
Select the Windows Logged-In User check box for logging on using the
Windows user name and password. If the Windows Logged-In User check box
is cleared, the MAXPRO NVR user name and password is used for authentication.
If there is no profile set as default, then select the Profile corresponding to the
MAXPRO NVR server to which you want to connect.
Set profiles if you have multiple MAXPRO NVR units and use the drop-down to
choose which NVR unit you would like to connect to.
Select the Display Video on Alarm check box to display the viewer as an alarm monitor.
MAXPRO NVR
MAXPRO NVR 3.1 Commissioning and Installation Guide
Advertisement
Table of Contents
