Table of Contents
Advertisement
A B O U T T H I S G U I D E
Warranty and Service
21. Reduced Air Flow
22. Mechanical Loading
23. Circuit Overloading
24. Reliable Earthing (Grounding)
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty period
Honeywell will repair or replace, at its sole option, free of charge, any defective products
returned prepaid.
In the event you have a problem with any Honeywell product, please call Technical Support at
1-800-323-4576 (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available for
the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.
Related Documents
This document listed in the table serves as a necessary prerequisite for understanding
MAXPRO NVR.
Document title
MAXPRO NVR Operator's
Guide
18
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of
the rack environment may be greater than room ambient. Therefore, consideration should
be given to installing the equipment in an environment compatible with the specified
operating temperature range.
Installation of the equipment in the rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
Mounting of the equipment in the rack should be such that a hazardous condition is not
caused by uneven mechanical loading.
Consideration should be given to connection of the equipment to supply circuit and the
effect that overloading of circuits might have on over-current protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
Reliable grounding of rack mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
Part number
Description
800-16422V1-
This document is written for everyday MAXPRO NVR users who
Rev-A
perform the basic video surveillance operations.
MAXPRO NVR 3.1 Commissioning and Installation Guide
Advertisement
Table of Contents
