Connecting Tv; Connecting To A Macintosh - Samsung SyncMaster 150MP PLUS User Manual

Setting up Your Monitor

Connecting TV

You may view television programs on the monitor if it is connected to an antenna or CATV cable without
installing any separate TV reception hardware or software on your computer.
1.Connect the CATV or antenna coaxial cable to the Antenna terminal on the
rear of the monitor.
You need to use a coaxial antenna cable.
2. Turn on the monitor.
3. Select TV using Source button among the external signal adjustment buttons.
4. Select a desired TV channel.
As this product is designed for PAL or SECAM signals only, you cannot view
TV programs in countries where NTSC signals are used.
6
Setting up Your Monitor

Connecting to a Macintosh

PC
14VDC Video Audio(ST)
1.Connect the power cord to the DC adapter and then connect the adapter jack to the
DC14V power port on the monitor.
(Voltage is automatically adjusted by the power adaptor.)
2.Connect the signal cable to the D-SUB port on the Macintosh computer.
3.For older model Macintoshes, you need to adjust the resolution control DIP switch on the
Macintosh adapter (optional) referring to the switch configuration table shown on its rear.
4.Turn on the monitor and Macintosh.
Contact a local Samsung Electronics service center to buy optional items.
7
New Model Macintosh
Old Model Macintosh
(Not included)
Adapter for Macintosh