Microphone Board, Microphone Bracket, Microphone Rubber And Microphone Cable - Lenovo Yoga AIO 9 Hardware Maintenance Manual

Microphone board, microphone bracket, microphone rubber and
microphone cable
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Removal steps
1. Remove the base module. See "Base module" on page 54.
2. Remove the LCD cover. See "LCD cover" on page 74.
3. Peel off the pieces of tape and then disconnect the microphone cable from the convertor board.
4. Remove two screws and then remove the microphone board with cable.
.
Chapter 6 Hardware removal and installation
77