Stand base bracket
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Removal steps
1. Remove the bottom rubber foot (left, right and middle). See "Bottom rubber foot (left, right and middle)"
on page 55.
2. Remove the bottom cover. See "Bottom cover" on page 57.
3. Remove four screws and then remove the stand base bracket.
Stand
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Removal steps
1. Remove the base module. See "Base module" on page 54.
58
Hardware Maintenance Manual