Lcd Backlight Cable, Touch Board Cable, And Lcd Lvds Cable - Lenovo ThinkCentre M90a Gen 3 Hardware Maintenance Manual

• "Serial connector module" on page 65.
• "Card reader board" on page 66.
• "GPU card" on page 66.
• "System fan" on page 67.
• "Heat sink" on page 68.
• "Microprocessor" on page 68.
• "System board" on page 69.
• "Power supply assembly (with AC-in bracket)" on page 73.
• "Integrated camera and microphone module" on page 72.
• "Side I/O brackets" on page 74.
• "Main frame" on page 75.
• "LCD bracket and LCD panel" on page 80.
Removal procedure

LCD backlight cable, touch board cable, and LCD LVDS cable

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
• "Computer stand" on page 52.
• "Rear I/O cover" on page 56.
• "System board shield" on page 57.
• "VESA mount bracket" on page 58.
• "Cover presence switch (intrusion switch)" on page 59.
• "Primary hard disk drive" on page 59.
• "Secondary hard disk drive and bracket" on page 61.
• "Optical drive" on page 60.
• "M.2 solid-state drive" on page 63.
82
M90a Gen 3 and M90a Pro Gen3 Hardware Maintenance Manual