Chapter 1 - Getting Started; Overview; What You Need; Belt Mount With Voice - Honeywell Dolphin 75e User Manual

1
Getting Started

Overview

The Dolphin 75e Wearable Solution consists of a Dolphin 75e terminal, a wearable sled, a ring scanner (optional), and/or head-
set (optional). The wearable sled is available in one of the following configurations:
• Arm Mount Sled (page
• Belt Mount Sled (page
The terminal is available in either standard or extended battery versions. The Dolphin 75e Wearable Solution is IP 54 rated.

What You Need

There are several use cases for the Honeywell Wearable Solution. The examples below indicate the typical items used in sam-
ple use cases. The Dolphin 75e terminal and accessories may be packaged separately from the other wearable accessories.

Belt Mount with Voice

• Dolphin 75e
• Belt mount sled
• Belt mount clip
• Headset adapter cable
• Headset

Arm Mount with Tethered Ring Scanner

• Dolphin 75e
• Arm mount sled
• Armband
• Tethered Ring Scanner

Arm Mount with Voice and Tethered Ring Scanner

• Dolphin 75e
• Arm mount sled
• Armband
• Audio end cap (to replace standard end cap)
• Headset adapter cable
• Headset
• Tethered Ring Scanner

About this Guide

This guide provides assembling and mounting instructions as well as information about terminal setup and configuration as a
wearable solution. Daily use instructions are included. This document describes only those features of the Dolphin 75e unique
to the Wearable Solution.

Additional Documents

This guide is intended to supplement the following documents available at www.honeywellaidc.com:
• Dolphin 75e Powered by Android 4.4 User's Guide
• Dolphin Power Tools User's Guide for Devices Powered by Android
• Honeywell_MobilitySDK_Android_D75e version 1.00.00.0011 or higher
3-2)
3-4)
1 - 1