Headers And Connectors - Supermicro SuperStorage SSG-6049SP-DE2CR60 User Manual

SuperStorage Server SSG-6049SP-DE2CR60/90 User's Manual

4.2 Headers and Connectors

Onboard Fan Header
Two 4-pin fan headers (JFAN1, JFANPW) used for CPU/system cooling. The onboard fan
speed is controlled by Thermal Management (via Hardware Monitoring) in the BIOS.
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which is
available from a third-party vendor. TPM/Port 80 is a security device which supports encryption
and authentication in hard drives. It allows the motherboard to deny access if the TPM
associated with the hard drive is not installed in the system.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
Trusted Platform Module/Port 80 Header
Pin Definitions
Pin# Definition Pin#
1 P3V3 2
3 PCIE_RESET_N# 4
5 SPI_PCH_CLK# 6
7 SPI_PCH_MOSI 8
9 JTPM1_P3V3A 10
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
60
Definition
SPI_TPM_CS_N
SPI_PCH_MISO
Ground
N/A
IRQ_TPM_SPIN_N