Maintenance Instructions; Battery Charger Specifications - Xenotronix MHTX-7 Series Operating Instructions

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS
CLEANING - Unplug the charger before attempting any cleaning. If it becomes necessary to clean the enclosure, wipe
the exterior of the enclosure with a damp cloth and a mild detergent. Do not use an abrasive cleanser. Do not spray
cleaners directly onto the charger or immerse unit in water.

BATTERY CHARGER SPECIFICATIONS

BATTERY CHARGER SPECIFICATIONS
Operating temperature
Storage temperature
Dimensions
Weight
Power Requirements
OUTPUT RATINGS: @ 20EC
Unit
Charge Amps
Float Amps
Charge Voltage
Reset Voltage
Open Circuit Voltage
Charge Timer
Battery
Refer any questions to XENOTRONIX Inc.
Monday-Friday 8:30am to 4:30pm ET
tel. 407-331-4793
0 to 40EC (32 to 104EF)
-40 to 80EC (-40 to 176EF)
H 3.8" (9.65 cm) x W 2.8" (7.1 cm) x D 2.8" (7.1 cm)
Less than 1.5 lbs (0.68 kg) with standard output cable
120 V~, 60 Hz, .2 A RMS
MHTX-7
C/10 or 0.1C, where C = Battery Capacity
(50 to 500 mA, refer to marking label on unit)
C/40 or 0.025C, where C = Battery Capacity
(Approximately 1/4 of rated output current)
Floats with respect to Battery Voltage
Approximately 21 volts (will switch into float mode)
Approximately 25 volts
14 hours ± 1 hr.
Rechargeable Nickel Metal Hydride, 1.2 to 14.4 Volts (1 to 12 cells)
500 mAHr to 5 AHr
fax. 407-331-4708
XENOTRONIX Inc. 8/00
Document MN2-MHTX7