Summary of Contents for Xenotronix Optimizer SX100-1
Page 1
Automatic Battery Charger User’s Manual Rev. 1.0 October 17, 2006 ™ THE EXTREME BATTERY CHARGER For Sales, Support and Service phone: 407-331-4793 fax: 407-331-4708 website: www.xenotronix.com email: information@xenotronix.com Xenotronix/TLI, Inc. 2541 Tracy Road Toledo, Ohio 43619 Phone: 419-666-6982 Fax: 419-666-6534...
Page 2
Notice to the User The information contained in this manual is believed to be correct. However, Xenotronix/TLI, Inc. assumes no responsibility for any inaccuracies therein. Information in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form, electronic or mechanical, for any purpose, without the express written permission of Xenotronix/TLI, Inc.
Recharge batteries in well ventilated areas to prevent build-up of explosive gases. Allow space around unit and adequate air circulation to reduce internal heat buildup. Do not place objects on top of the charger or restrict the airflow through the charger and do not operate in a small, enclosed space. Xenotronix/TLI...
1 or 2 seconds until the output is deactivated. If the charger is accidentally connected to a battery in a reversed condition, the charger will not turn on and will not be damaged. Xenotronix/TLI...
In either case, the charger output remains off until a battery is properly attached. Attaching the Battery Determine the battery polarity. Most batteries identify the positive terminal with a “+” sign or the color red and identify the negative terminal with a “−” sign or the color black. Xenotronix/TLI...
0.5 of the time spent in bulk, or 1 hour max. The charge current is limited to 10% of the maximum charge current. This charge program may not be appropriate for all battery types and capacities. Consult your battery documentation. Xenotronix/TLI...
Charger and battery faults are indicated by quickly and alternately flashing the charge and ready indicators. A charger fault occurs when the charger output is on when it should be turned off. A charger fault is permanent. To confirm a charger fault, with no battery Xenotronix/TLI...
CUSTOM UNITS NOTE Xenotronix/TLI can make custom units, or modify our existing units, to exactly match your charging needs. Call our sales department for technical information and pricing. Following are some of the modifications we can perform:...
Do not immerse unit in water. OPTIONS The OPTIMIZER may be ordered in a 230 VAC input version with a European “Schuko” plug and a switch selectable 115/230 VAC input version having the standard plug. Xenotronix/TLI...
Indicators yellow LED = Charge; green LED = Ready Dimensions (L x W x H) 6.50” (16.5 cm) x 6.40” (16.3 cm) x 2.00” (5.1 cm) Weight (including cables) 2.65 lbs (1.2 kg) DIMENSIONS 6.40 6.00 2.00 6.50 4.00 Xenotronix/TLI...
Need help?
Do you have a question about the Optimizer SX100-1 and is the answer not in the manual?
Questions and answers