Sharp MX-B707F User Manual page 108

Understanding the printer menus
Menu item
IPv6
Enable IPv6 (On*)
Enable DHCPv6 (Off*)
Stateless Address Autoconfiguration (On*)
DNS Server Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix (64*)
All IPv6 Addresses
All IPv6 Router Addresses
Network Address
PCL SmartSwitch
Off
On*
PS SmartSwitch
Off
On*
Job Buffering
Off*
On
Mac Binary PS
Auto*
On
Off
Ethernet
Menu item
Network Speed
IPv4
Enable DHCP (On*)
Set Static IP Address
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the IPv6 settings.
Specify the network address.
Set the printer to switch automatically to PCL emulation
when a print job requires it, regardless of the default
printer language.
Note: When this setting is disabled, the printer does
not examine incoming data and uses the default printer
language specified in the Setup menu.
Set the printer to switch automatically to PostScript
emulation when a print job requires it, regardless of the
default printer language.
Note: When this setting is disabled, the printer does
not examine incoming data and uses the default printer
language specified in the Setup menu.
Temporarily store print jobs on the hard disk before
printing.
Note: This menu item appears only when a hard disk is
installed.
Set the printer to process Macintosh binary PostScript
print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Description
Show the speed of the active network adapter.
Configure the IPv4 settings.
108