Declaration - DFRobot SEN0521 User Manual

Done
4.
Command for configuring multiple parameters, such as
sensitivity and delay time parameters being
configured simultaneously.
（1） Configure the sensitivity to 5.
（2） Delay time configuration: Confirm that the delay is set to 0.5 seconds and
disappear delay is set to 5 seconds.
leapMMW:/> sensorStop
leapMMW:/> setSensitivity 5
Done
leapMMW:/> setLatency 0.5 5
Done leapMMW:/> saveConfig
save cfg complete
Done
leapMMW:/> sensorStart
Done
5.

Declaration.

Please carefully review this statement before using the product described in this
document. Using the product constitutes acceptance and acknowledgement of the contents of
this statement. Customers who use the millimeter-wave human presence detection module
must perform tests to confirm that the product meets their application needs, based on
the product features, performance, and functionality described in this document. Chengdu
Jiechipenny Technology Co., Ltd. assumes no liability for any damages or injuries
resulting from improper use.
As this product is constantly updated and iterated upon, the documentation may be
subject to change without prior notice. We regretfully inform you that we will not provide
any separate notifications. Therefore, we kindly ask that you confirm the updated
information and any errata through appropriate channels before applying the product. We
appreciate your understanding.
24