Configuration Detection Sensitivity:setsensitivity、Getsensitivity; Configure Output Delay Time:setlatency、Getlatency - DFRobot SEN0521 User Manual

Configuration Detection Sensitivity:setSensitivity、
4.1.2
getSensitivity
Describe:
The 5.8GHz microwave radar module has 10 levels of sensitivity, with higher numbers indicating
greater sensitivity and lower numbers indicating less sensitivity. 9 is the highest level of
sensitivity, and the default sensitivity value of the module is 7.
Note: Please configure the sensitivity according to the actual operating environment and requirements. Lower sensitivity
requires larger target movement or closer distance to be detected, while higher sensitivity requires a cleaner environment
and may result in more false alarms in the presence of interference.
Configuration parameter command:
Send command:setSensitivity par1
Read configuration parameters command:
Send command:getSensitivity
Command response:Response par1
Parameter item:
par1
Command execution result:
Done
Error
Example:
Set detection sensitivity
to 6.
Set detection sensitivity
to 0.
Configure Output Delay Time:setLatency、getLatency
4.1.3
Describe:
Check sensitivity: Range of
values is from 0 to 9, with
a default of 7.
Command execution successful.
Command execution failed.
setSensitivity 6
leapMMW:/>
setSensitivity 0
leapMMW:/>
9