Configuration Example: Complete Process - DFRobot SEN0521 User Manual

Read software
version
information.

Configuration Example: Complete Process.

4.5
1.
Configure detection distance to 3 meters.
leapMMW:/>
leapMMW:/> setRange
leapMMW:/> saveConfig save cfg
complete Done
sensorStart
Done
2.
Configure sensitivity to 6; higher numbers indicate
greater sensitivity.
leapMMW:/> sensorStop
leapMMW:/> setSensitivity 6
Done leapMMW:/> saveConfig
save cfg complete
Done
leapMMW:/> sensorStart
Done
3.
Configure delay time.
（1） Confirm that the delay is set to 2 seconds, i.e. the target must persist for
2 seconds before being detected.
（2） Set the disappearance delay to 15 seconds, meaning that the target must be
absent for 15 seconds before being considered as absent.
leapMMW:/> sensorStop leapMMW:/>
setLatency 2 15
Done leapMMW:/> saveConfig
save cfg complete
Done
leapMMW:/> sensorStart
getSWV
leapMMW:/>
SoftwareVersion:JYSJ_02.08.08.010827
Done
sensorStop
0 3 Done
leapMMW:/>
23