Specifications; Performance - Qvis APOIP-EYE1.3 User Manual

Please note: system cannot support these two types of power supplying at the same
time. As a recommendation, if you wish for your security system to be continue to run
when there is a loss of power or unstable electrical supply coming from the mains, a
UPS system should be installed.
 Log function
 Supports system resource information and running status real-time display.
 Day/Night mode auto switch.
 Built-in IR light. Supports IR night vision.
 Supports motion detect.
Assistant
 Supports picture parameter setup such as electronic shutter and gain setup.
Function
 Backlight compensation: screen auto split allows backlight compensation to
 Supports video watermark function to avoid vicious video modification.
 The enclosure conforms to the IP66 protection testing. It can withstand a

1.3 Specifications

1.3.1 Performance

Please refer to the following sheet for network camera performance specification:
Model
Parameter
Main Processor
OS
System
Resources
User Interface
System Status
Image Sensor
Pixel
Day/night
Gain Control
White Balance
Exposure Mode
Video
Compression
Standard
Video Frame
Rate
© Copyright Qvis ®. All documentation rights reserved.
adjust the brightness.
variety of weather conditions and outdoor environments.
APOIP-EYE1.3
TI Davinci high performance DSP
Embedded LINUX
Support real-time network, local record, and remote operation at the
same time.
Remote operation interface such as WEB, DSS, PSS
Bit stream statistics, log, and software version.
1/3-inch CMOS
1280(H)x960(V)
Support IR-CUT switch
Fixed/Auto
Manual/Auto
Manual/Auto
PAL: It ranges from 1/3 to 1/10000
NTSC: It ranges from 1/4 to 1/10000
H.264/JPEG/MJPEG
PAL:
Main stream: (1280x960@15fps)
Extra stream: (704×576) or
(352×288) @ 25fps
APOIP-EYE2
1/2.8-inch CMOS
1920(H) x 1080(V)
PAL:
Main stream(1920*1080@25fps),
extra stream,(704*576@25fps)
2