CHAPTER 3 ENGINE
Engine Center
Gear position bolt
Remove gear position bolt 1
Remove spring and steel ball
Right Crankcase
Remove left crankcase bolts
Remove right crankcase bolts
Separate right crankcase with special tool
Caution
The Crankcase separator plate
should be parallel with the end face
of crankcase
Crankshaft should remain in the left
crankcase half.
Driven Bevel Gear, Front Output Shaft
Remove bevel gear cover bolt
Remove driven bevel gear ③
Remove front output shaft nut ④
LH500ATV-D SERVICE MANUAL14.0
CHAPTER 3 ENGINE
PAGE. 3- 52