Linhai HY510S Service Manual page 125

CHAPTER 3 ENGINE
Shift Cam, Shift For
Install shift can① and shift fork②
Check each part for smooth turning
Install low range driven gear to counter shaft③
Spray adequate engine oil to each part.
Drive Bevel Gear
Install drive bevel gear and tighten to the specified
torque.
Drive bevel gear tightening torque: 32N. m
Material: Thread Locker
Right Crankcase
Driven Bevel Gear
Install driven bevel gear and tighten to the specified
torque.
Driven bevel gear tightening torque: 25N. m
Check bevel gear backlash (Refer to 12-44)
Front Output Shaft
Install front output shaft to right crankcase
LH500ATV-D SERVICE MANUAL14.0
CHAPTER 3 ENGINE PAGE. 3- 94