Table of Contents
Advertisement
SUGGESTED BATTERIES AND
CHARGERS
Category
Type
WA3551.1
20V Battery
WA3551
WA3760
WA3860
WA3772
20V Charger
WA3880
WA3869
WA3883
We recommend that you purchase your
accessories from the same store that sold you
the tool. Choose the type according to the
work you intend to undertake. Refer to the
accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for sawing wood,
plastic, soft metal and building materials while
resting firmly on the workpiece.
ASSEMBLY
REPLACING/INSERTING THE SAW BLADE
Remove the battery pack from the
socket before carrying out any
adjustment, servicing or maintenance.
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade. When changing the
saw blade, take care that the saw blade holder
is free of material residue, e. g. wood or metal
shavings.
1. SELECTING A SAW BLADE (See Fig. A)
NOTE: Only use maximum blade lengths
specified in table below for the intended
purpose of application. Failure to adhere
Cordless Li-Ion handy saw
to this advice will result in damage to the
product and void of warranty.
Capacity
Pruning blade (152mm,
2.0Ah
2.0Ah
(152mm, 18TPI, HSS)
0.4A
2. INSERTING A SAW BLADE (See Fig. B)
2.0A
Remove the battery pack from the
socket before carrying out any
2.0A
adjustment, servicing or maintenance.
2.0A
Pull down the tool-free blade clamp lever (6),
2.0A
Insert the blade shank into the blade holder
until it stops. Release the clamp lever (6) to
4.0A
lock the blade (7/8) in position.
Check the tight seating of the saw blade.
A loose saw blade can fall out and lead to
injuries.
3. REMOVING A SAW BLADE (See Fig. B)
To remove a blade, depress the clamp lever,
pull out the blade.
CHARGING
together so do not attempt to use any
other devices. Never insert or allow
metallic objects into your charger or
battery pack connections because of an
electrical failure and hazard will occur.
Your battery pack is UNCHARGED and you
must charge once before use
The battery charger supplied is matched to the
Li-Ion battery installed in the machine. Do not
use another battery charger.
1. CHARGING YOUR BATTERY PACK
The Li-Ion battery is protected against deep
discharging. When the battery is empty,
the machine is switched off by means of a
protective circuit. In a warm environment or
after heavy use, the battery pack may become
too hot to permit charging. Allow time for the
battery to cool down before recharging.
6TPI, 65Mn)
Bi metal blade
WARNING: The charger and battery
pack are specially designed to work
WG894E WG894E.X
Typical application
Garden limbs, etc.
Metals and wood
,etc.
11
Advertisement
Table of Contents
