Lantronix xDirect-IAP Quick Start Manual

xDirect
WHAT'S IN THE BOX
xDirect -IAP Quick Start Guide
™
WHAT'S IN THE BOX
xDirect ™ -IAP Quick Start Guide
WHAT'S IN THE BOX
(out) Female (DCE) Power / Status Power Supply* LED xDirect Device Server DB9F in RS485 (2-Wire) Mode Activity LED Link LED DB9F in RS232 Mode xDirect Device Server Quick Start Guide

1 HARDWARE REVIEW

Depending on the xDir ect™ model, the follo wing pinouts apply Quick Start Guide ™ xDirect * Not included with xDirectPoE version WHAT'S IN THE BOX xDIRECT PINOUTS xDIRECT PINOUTS Contact 8 xDirect DB9F in RS422/485 (4-Wire) Mode ™ RJ45 Quick Start Guide on bottom 1 HARDWARE REVIEW LED

2 HARDWARE INSTALLATION

Quick Start Guide 1. Connect a serial device to the xDirect. 5VDC with International adapters 2. Connect an Ethernet cable to the RJ45 port. WHAT'S IN THE BOX 3. For standard xDirect units, supply power to your unit using the power RJ45 ETHERNET supply that was included in the packaging. Activity LED 4. For the xDirectPoE version, power is supplied to your unit over an Contact 1 Ethernet interface using an 802.3af PoE compliant power source such (All models) as a PoE mid-span or PoE Ethernet switch. (xDirect485 & PoE Models) THIS COMPLETES THE HARDWARE INSTALLATION. (xDirect485 & PoE Models) Power Port Link LED (mini USB connector) Reset Switch - 3.5" (88.9 mm) Serial TX Depending on the xDirect™ model, the following pinouts apply Serial Port DB9 Serial RX 1 DSR (out) (out)RTS (in) (in) CTS 5-15 RX DTR (in) GND LED Power / Status TX VDC (in) RX+ TX- Serial RX 5 9 (out) 5 5 on bottom LED RJ45 Activity LED (in) VDC 1 5-15 LED 9 LED TX+ RX- GND 6 6 6 GND VDC TX/ 5-15 RX+ (in) TX/RX- Link LED DCD Reset Switch - 9 Serial TX 1 Female (DCE) 5VDC with International adapters Power Supply* Serial Port DB9 Power Port 3.5" (88.9 mm) * Not included with xDirectPoE version (mini USB connector)
DCD RX TX DSR 2. Connect an Ethernet cable to the RJ45 port. 5-15 GND Contact 8 Activity LED Link LED RJ45 ETHERNET supply that was included in the packaging. 3. For standard xDirect units, supply power to your unit using the power 5 1 Contact 1 5 DB9F in RS232 Mode (in) (All models) (in) DB9F in RS422/485 (4-Wire) Mode (out) (xDirect485 & PoE Models) (in) GND (out) DTR (out) (in) 9 5-15 6 VDC TX+ RX- (in) 9 CTS VDC 2 HARDWARE INSTALLATION (out) 1. Connect a serial device to the xDirect. RTS Quick Start Guide DB9F in RS485 (2- W ire) Mode 9 THIS COMPLETES THE HARDWARE INSTALLATION. 5-15 VDC 5 RX+ TX- TX/RX- Ethernet interface using an 802.3af P oE compliant power source such 4. For the xDirectPoE version, power is supplied to your unit over an 6 1 TX/ GND (in) RX+ as a PoE mid-span or PoE Ethernet switch. (xDirect485 & PoE Models) 1 6 xDirect Device Server * Not included with xDirect-IAP PoE version 5VDC with International adapters Power Supply*
1 HARDWARE REVIEW
Power / Status LED LED Serial RX Female (DCE) Serial Port DB9 Power Port (mini USB connector)
Link LED RJ45 Reset Switch - LED Serial TX
xDIRECT-IAP PINOUTS Activity LED on bottom 3.5" (88.9 mm)
9 5 RX (out) (in) TX (in) DTR GND DCD (out) 1 6 5 9 GND RX+ TX- 1 6 9 5 GND TX/RX- 1 6
DB9F in RS232 Mode (out) DSR 5-15 VDC (in) CTS (out) RTS (in) DB9F in RS422/485 (4-Wire) Mode TX+ RX- 5-15 VDC (in) VDC DB9F in RS485 (2-Wire) Mode 5-15 (in) RX+ TX/
RJ45 ETHERNET Power Supply*
Contact 8 Link LED Activity LED Contact 1
2 HARDWARE INSTALLATION 1. Connect a serial device to the xDirect. 4. For the xDirect-IAP PoE version, power is supplied to your unit over
3. For the standard xDirect-IAP (non-PoE) version, supply power to your unit using the power supply that was included in the packaging. 2. Connect an Ethernet cable to the RJ45 port. an Ethernet interface using an 802.3af PoE compliant power source such as a PoE mid-span or PoE Ethernet switch. THIS COMPLETES THE HARDWARE INSTALLATION. 5VDC with International adapters
Quick Start Guide xDirect Device Server
* Not included with xDirect-IAP PoE version
1 HARDWARE REVIEW
Serial Port DB9
Female (DCE)
Serial RX
Power / Status LED
LED Power Port
(mini USB connector)
Serial TX
Link LED LED
RJ45
Reset Switch -
on bottom
Activity LED
3.5" (88.9 mm)
xDIRECT-IAP PINOUTS
DTR TX RX DCD
GND (in) (in) (out) (out) GND RX+ TX- GND TX/RX-
5 1 5 1 5 1
9 6 9 6 9 6
5-15 CTS RTS DSR 5-15 TX+ RX- 5-15 TX/
VDC (out) (in) (out) VDC VDC RX+
(in) (in) (in)
DB9F in RS232 Mode DB9F in RS422/485 (4-Wire) Mode DB9F in RS485 (2-Wire) Mode
RJ45 ETHERNET
Link LED Activity LED
Contact 8 Contact 1
2 HARDWARE INSTALLATION
1. Connect a serial device to the xDirect. 4. For the xDirect-IAP PoE version, power is supplied to your unit over
an Ethernet interface using an 802.3af PoE compliant power source
2. Connect an Ethernet cable to the RJ45 port.
such as a PoE mid-span or PoE Ethernet switch.
3. For the standard xDirect-IAP (non-PoE) version, supply power to your
THIS COMPLETES THE HARDWARE INSTALLATION.
unit using the power supply that was included in the packaging.
Quick Start Guide
1 HARDWARE REVIEW
Power / Status
LED
Link LED
RJ45
Reset Switch -
on bottom
Activity LED
xDIRECT-IAP PINOUTS
DTR TX RX DCD
GND (in) (in) (out) (out)
5
9
5-15 CTS RTS DSR
(out) (in) (out)
VDC
(in)
DB9F in RS232 Mode
RJ45 ETHERNET
Link LED
Contact 8
2 HARDWARE INSTALLATION
1. Connect a serial device to the xDirect-IAP device server.
2. Connect an Ethernet cable to the RJ45 port.
3. For the standard xDirect-IAP (non-PoE) version, supply power to your
unit using the power supply that was included in the packaging.
-IAP Quick Start Guide
™
xDirect-IAP Device Server
Serial RX
LED
Serial TX
LED
1 5
6 9
DB9F in RS422/485 (4-Wire) Mode
Activity LED
Contact 1
Serial Port DB9
Female (DCE)
GND RX+ TX-
1
6
5-15 TX+ RX-
VDC
(in)
4. For the xDirect-IAP PoE version, power is supplied to your unit over
an Ethernet interface using an 802.3af PoE compliant power source
such as a PoE mid-span or PoE Ethernet switch.
THIS COMPLETES THE HARDWARE INSTALLATION.
Power Supply*
5VDC with International adapters
* Not included with xDirect-IAP PoE version
Power Port
(mini USB connector)
3.5" (88.9 mm)
GND TX/RX-
5
9
5-15 TX/
RX+
VDC
(in)
DB9F in RS485 (2-Wire) Mode
1
6