21
Connect remaining wires from Step 8
Push down on the tabs to put the wires into the inner
holes of their corresponding terminals on the wall
plate (one wire per terminal) until it is firmly in place.
Gently tug on the wires to verify they are secure.
Tip: If you need to release the wires again, push down
the terminal tabs on the sides of the wall plate.
22
Close the door and mount the wall plate
Mount the wall plate using the provided screws.
Install all three screws for a secure fit on your wall.
Tip: Prior to tightening the screws, use a level to
ensure the wall plate is level.
23
Attach your thermostat
Align the thermostat on the wall plate and firmly snap
into place.
16
This wiring is just an example,
actual wiring may vary.