Advertisement
Available languages
Available languages
20
Determine Correct R-Switch Position and Insert R-wire or wires
Set the R-switch up or down based on your wiring notes in Step 8. Insert wires into the inner
holes of the terminals on the wall plate. The tabs will stay down once the wire is inserted.
If you have 1 R-Wire (R, RC, RH):
If you have 2 R-Wires (R, RC, RH):
1. Ensure the
right R-switch
is in the up
position.
1. Set right
R-switch to the
down position.
2. Insert your
R-wire (R, Rh
or Rc) into
R-terminal.
OR
2. Insert your Rc
wire into Rc-
terminal.
3. Insert your R
or Rh wire into
R-terminal.
15
Advertisement
