Setting The Security - Security Menu; Saving The Camera Position And Action; Preset Position Menu; Position Tab - Saving Pan/Tilt/Zoom Position - Sony ipela SNC-RH124 User Manual

Setting the Security
— Security Menu
When you click Security in the Administrator menu, the
Security menu appears.
This allows you to control which computers can have
access to the camera.
Likewise, when using IPv6, security settings can be
configured for each network.
Security function
To activate the security function, select On.
Default policy
Select the basic policy of the limit from Allow and Deny
for the computers specified in the Network address/
Subnet 1 to Network address/Subnet 10 menus below.
Network address/Subnet 1 to Network
address/Subnet 10
Type the network addresses and subnet mask values that
you want to allow or deny access to the camera.
You can specify up to 10 network addresses and subnet
mask values. For a subnet mask, type 8 to 32.
(In the case of IPv6, enter a value between 8 and 128.)
Select Allow or Deny from the drop-down list on the
right for each network address/subnet mask.
Tip
The subnet mask value represents the bit number from
the left of the network address.
For example, the subnet mask value for "255.255.255.0"
is 25.
If you set 192.168.0.0/24 and Allow, you can allow
access from computers having an IP address between
"192.168.0.0" and "192.168.0.255."
Note
You can access the camera even from a computer having
an IP address whose access right is set to Deny, if you
enter the user name and password set for the
Administrator boxes in the User menu.
OK/Cancel
See "Buttons common to every menu" on page 31.
Saving the Camera
Position and Action

Preset position Menu

When you click Preset position
menu, the Preset position menu appears. This allows you
to save the camera's pan, tilt and zoom positions and set
position/shadow tours (programmed action of the
camera).
The Preset position menu consists of 3 tabs: Position,
Tour (position) and Tour (shadow).
The Preview screen is displayed.
Position Tab — Saving pan/tilt/
zoom position
You can set up to 256 camera positions (pan, tilt and
zoom positions).
Preview screen
This screen is for monitoring images and setting preset
positions.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 21).
Home position setting
Set the current camera position as the home position.
Setting the Security — Security Menu
—
in the Administrator
67