Installation On Tanks And Vessels - Bartec PSB Design Manual

Installation on pumps:


Installation on tanks and vessels

For tank diameters of up to 2 m the trace heater is attached using polyester fixing straps and tensioning buckles.

To fasten the fixing straps thread the polyester straps through the tensioning buckle as shown and pull the ends of the straps.

21-1S00-7D0001/-
05/2023-EHT-466853
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
16
17
Page 33 / 42