Acceptance Report / Record Of Inspection - Bartec PSB Design Manual

Self-regulating trace heating systems

Acceptance report / Record of inspection

Protocol type
Inspection before commissioning
Visual inspection
Project information
Project / Customer
Order Comm. No. / BARTEC Order No.
Date
Installation details
Heating circuit type
Ex version
Switchgear / Distribution panel
Thermal insulation
Heating circuit data
Heating Circuit No.
yes
Sub-Heating circuit
Pipe-/Vessel No.
Building
Product
Trace heater type
Lot No. of trace heater
_____________________ m
Trace heater length
Serial No. connection kit
Serial No. junction box
_____________________ V
Voltage
Current (Switch on / opera-
tion)
___________________ W/m
Output power trace heater
_____________________ Ω
Trace heater resistance
Insulation resistance at ..... > _________________ MΩ
V (Test 1)
> _________________ MΩ
Insulation resistance at .....
V (Test 2)
°C
Temperature settings
Controller ______
______
Limiter
Low temperature ______
Remarks:
________________________________________________________________________________________________________________________________
____________________________________
City/Date
NOTICE
Claims under warranty will not be considered if the acceptance report is not filled in completely.
21-1S00-7D0001/-
05/2023-EHT-466853
Design Guide for Hazardous / Industrial
Inspection after modification
Close inspection
Electric Trace Heating of Pipes
yes no
Included in the scope of delivery
yes no
Thermal insulation material
Check before installation of the insulation
Date / Name / Signature
no yes
_____________________ m
_____________________ V
___________/__________ ___________/__________
A
___________________ W/m
_____________________ Ω
> _________________ MΩ
> _________________ MΩ
yes no °C
______
______
______
_____________________________________
BARTEC Contractor
Name / Signature
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Periodic inspection
Detailed inspection
Electric Trace Heating of Tanks/Vessels
Zone Temperature class T
UV Name ESS/LDP
Test report
Thermal insulation thickness in mm (inch)
Check after installation of the insulation
Date / Name / Signature
no yes
_____________________ m
_____________________ V
___________/__________ A
A
___________________ W/m
_____________________ Ω
> _________________ MΩ
> _________________ MΩ
yes no °C yes
______
______
______
_____________________________________
Customer
Name / Signature
Ex group
no yes no
_____________________ m
_____________________ V
___________/__________ A
___________________ W/m
_____________________ Ω
> _________________ MΩ
> _________________ MΩ
no °C yes
______
______
______
no
Page 40 / 42