Installation On Tanks And Vessels - Bartec PSB Design Manual

Self regulating trace heating systems

Installation on tanks and vessels

For tank diameters of up to 2 m the trace heater is attached using polyester fixing straps and tensioning buckles.
▪
To fasten the fixing straps thread the polyester straps through the tensioning buckle as shown and pull the ends of the straps.
▪
At first, install fixing straps around the beginning and end of the tank and fasten them with slight tension.
▪
Upright tank
01-5800-7N0012/-
05/2019-EHT-432712
Design Guide for Hazloc / Industrial
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Horizontal tank
17
18
Page 34 / 46