Table of Contents
Advertisement
The following setting is necessary for the call
function from terminal to app:
Local Display Menu:
Web interface:
7.3.4 Basic settings
Voice settings / sound settings
Voice output:
Activate the voice output when
entering and activate the key tone
when entering.
Volume:
0 -10
Time settings
Time zone:
Setting the time zone
Current time:
Manual time setting. The NTP
function for automatic
determination of the time can be
optionally carried out via the web
interface.
DST setting:
Setting the dates for the
normal/summer time changeover.
Hibernation
The terminal's monitor displays the default background image after 20 seconds without any screen activity
(fixed period).
After another 20 - 999 seconds, the monitor enters sleep mode, i.e. the display is off. This period can be set.
Select language
GERMAN and ENGLISH are available as display languages in the local display.
Block / Building / Unit No.
These parameters assign the terminal to the desired main monitor area in the context of intercom use.
The configuration of the main monitor number is done in the menu "Admin Menu / Display / Quick Key
/ Call Special Room / Room Number" for the 1st main monitor (or 1st flat).
Up to 3 buttons can be programmed to call 3 different main monitors (or flats).
The configuration of all 3 buttons (incl. naming) is done in the web interface of the terminal ("Admin login /
Configuration / Intercom / Call button / Call specified indoor station").
Image correction
Image correction is used to brighten or smooth the video representation on the display.
Admin Menu / Display /
Quick Key / Call App
Admin login / Configuration
/ Intercom / Call button /
APP
General settings
Voice settings
Time settings
Hibernation
Select language
Block no.
Building no.
Unit no.
Image correction
23
>
>
60 >
German >
1 >
1 >
1 >
Deactivate >
Advertisement
Table of Contents
