Connecting With Wired Lan; Connecting With Wireless Lan - Panasonic PT-VW435NE Operating Instructions Manual

Connecting with Wired LAN

Projector settings
J
1 ) Use the LAN cable (Straight) to connect the projector with computer.
2 ) Turn on the projector and press the <MENU> button on the remote control.
3 ) Press the menu button to open the [Network] menu, and then select [Wired LAN],
and press <ENTER> button.
4 ) Set the detailed setup of [Wired LAN].
For details, see "Wired LAN" (
Note
Please confirm with your network administrator before you connect to an existing network.
z
The following settings are set before the projector leaves the factory.
z
DHCP
IP Address
Subnet Mask
Default gateway 192.168.10.1
DNS 1/DNS 2
Computer operation
J
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1 ) Turn on the computer.
2 ) Make the network setting according to your system administrator.
If the projector settings are the default settings (
network settings.
IP address
Subnet mask
Default gateway

Connecting with Wireless LAN

Projector settings
J
1 ) Turn on the projector and press the <MENU> button on the remote control.
2 ) Press the menu button to open the [Network] menu, and then select [M-DIRECT], or
[USER 1] ~ [USER 3] for [WIRELESS LAN] and press <ENTER> button.
3 ) According to the network number selected in step 2, set the detailed setup of
[Wireless detailed setup].
For details, see "Wireless detailed setup" (
page 65).
Æ
OFF
192.168.10.100
255.255.255.0
NONE
192.168.10.101
255.255.255.0
192.168.10.1
page 66-69).
Æ
Æ page 65), the computer can be used with the following
Network
73
ENGLISH -