Panasonic PT-VW435NE Operating Instructions Manual page 99

Problem
z
Picture from a HDMI
device does not
z
appear or picture is
not stable.
z
z
No sound is output
z
from a HDMI device.
z
The image is
distorted or runs off.
The exclamation
z
mark appears on
the screen.
Note
If the problem persists, after confirming the contents of the table, please consult your dealer.
z
Is the HDMI cable securely connected?
Turn off the power of the projector and the connected devices. Then turn
the power of the projector and the connected devices back on.
Isn't unsupported signal cable connected?
Set the sound channel of the attached device to Linear PCM.
If no audio signal is output during HDMI cable connection, connect the
audio cable to COMPUTER AUDIO IN 2 terminal and set to "Computer
2" in "Sound" of "Setting" menu.
Check [PC adj.] or [Screen] and adjust them.
Your operation is invalid. Operate correctly.
Cause
Troubleshooting
Reference
page
29
—
108-111
—
58
46, 52
—
ENGLISH -
99