OPERATION
12.2 STEERING (CHANGING DIRECTION OF TRAVEL)
Avoid making sudden changes in the direction of travel. In particular, it is dangerous when traveling at
high speed, as it is difficult to control the machine.
When carrying out steering facing the machine, the direction of steering is the opposite, so check the direction
carefully.
1.
When steering the machine, operate left control lever (1) in the direction that it is desired to turn.
12.3 WORK EQUIPMENT (BLADE RAISE/LOWER/FLOAT, TILT
LEFT/RIGHT, RIPPER UP/DOWN, RIPPER TILT IN/BACK)
When operating the work equipment, avoid starting or stopping suddenly. Operating the work equipment
suddenly makes the machine unstable and is extremely dangerous.
1.
Operate right control lever (1) to carry out operations.
12.4 ACCELERATION/DECELERATION
1.
Operate with right control lever (2).
Only when right control lever (2) is being operated, it is possible to change the engine speed temporarily from the
speed set by the engine speed control switch.
Engine speed control switch
Direction of lever operation
Amount
Low
High
WARNING
CAUTION
WARNING
Acceleration (pull)
Large
Small
Medium
High
No change
No change
(high)
(high)
12. Operation using radio control
Deceleration (push)
Large
Small
No change
No change
(low)
(low)
Medium
Low
3-27