Table of Contents
Advertisement
OPERATION
4.
Set the parking lever to the FREE position (raised).
NOTICE
When the above procedure is followed, electricity is sup-
plied to the radio controller, and when the radio control is
operated, the parking brake is applied.
5.
Checks before starting for transmitter, receiver unit, and controller
When operating the radio control, even if radio control operation is a started with all the switches ON, the
receiver may take this as a reception error and it may not be possible to operate the radio control. For this
reason, check that the condition is as follows before starting operations.
Install a charged battery to the transmitter.
Neutral check for transmitter
Engine speed control switch`
Control levers
Emergency stop switch
Push button switch on control lever
Set transmitter horizontal
6.
Turn the transmitter key switch to position 1.
This turns the power on.
All the machine lights and rotating lamps light up for
approx. 2 seconds, then go out.
LOW position
Neutral (levers at central position)
Not pressed
Not pressed
Transmitter must not be tilted
10. HANDLING RADIO CONTROL
START
3-21
Advertisement
Table of Contents
