Table of Contents
Advertisement
10. HANDLING RADIO CONTROL
10.2 FLOW CHART FOR STOPPING OPERATION USING RADIO
CONTROL
Transmitter has been tilted
continuously for more than
2 seconds.
If the engine does not stop (this may happen if an error has occurred and the red rotating lamp is lighted
up), stop the machine at a safe place, use the radio control operation to apply the parking brake, and
check that the condition is safe.
Then get on the machine, set the parking lever to the LOCK position, turn the key to the OFF position,
and stop the engine.
3-18
After approx. 3 seconds after
turning power key switch on
transmitter OFF.
Start engine.
Set parking lever to LOCK position (lowered)
Return key on machine to OFF position
Set selector switch to ON-BOARD
OPERATION
Press emergency stop button
on transmitter.
Advertisement
Table of Contents
