Table of Contents
Advertisement
OPERATION
9.1.4 OPERATION METHOD FOR SSC MODE SELECTION USING RADIO
CONTROL
Check that the radio control can be operated (yellow rotating lamp is flashing).
Selecting dozing mode
1.
Each time the center control lever is pulled back fully, the
mode is switched as follows.
Lock-up mode ON → lock-up mode OFF (normal) → economy
mode 1 → economy mode 2
2.
Each time the center control lever is pushed forward fully,
the mode is switched as follows.
Economy mode 2 → economy mode 1 → lock-up mode OFF
(normal) → lock-up mode ON
3.
In the condition in Step 1 or Step 2, each time the horn
button is pressed, the horn will sound and the reverse
slow mode will be switched ON/OFF.
REMARK
hen carrying out the operation in Step 2, if the mode is switched lock-up mode OFF (normal) → lock-up
mode ON, the reverse slow mode is automatically turned OFF.
When each mode is switched, the horn sounds for 1 second and all the rotating lamps light up.
For details of each mode, see the Operation and Maintenance Manual for the standard machine.
Selecting ripping mode
1.
Each time the center control lever is operated fully to the
left, the mode is switched as follows.
Mode 5 → mode 4 → mode 3 → mode 2 → mode 1 → mode
OFF
2.
Each time the center control lever is operated fully to the
right, the mode is switched as follows.
Mode OFF → mode 1 → mode 2 → mode 3 → mode 4 →
mode 5
3.
In the condition in Step 1 or Step 2, each time the button
at the top of the center control lever is pressed, the
reverse slow mode will be switched ON/OFF.
REMARK
When carrying out the operation in Step 2, if the mode is switched mode OFF → mode 1, the lock-up
mode is automatically turned OFF.
When each mode is switched, the horn sounds for 1 second and all the rotating lamps light up.
For details of each mode, see the Operation and Maintenance Manual for the standard machine.
CAUTION
9. EXPLANATION OF COMPONENTS
3-9
Advertisement
Table of Contents
