Table of Contents
Advertisement
OPERATION
10. HANDLING RADIO CONTROL
10.3.2 TILT ANGLE
NOTICE
During radio control operations, do not operate with the transmitter tilted more than necessary (more than
45°).
Tilt detection
A tilt detection switch is built into the transmitter. If the radio control transmitter is tilted more than 45° in any direc-
tion, the tilt detection switch is actuated and judges that the transmitter is tilted.
If the tilt detection switch remains actuated for more than two seconds, the transmitter is set to the emergency stop
condition and the engine stops.
3-24
Advertisement
Table of Contents
