2.12 Installing the AC/DC Adaptor
There is
one (1)
power connector on your S5567 motherboard. The S5567 supports
DC Input 12V/90W DC Adaptor. Please check power adaptor models from TYAN
website.
2.13 Finishing Up
Congratulations on making it this far! You have finished setting up the hardware
aspect of your computer. Before closing up your chassis, make sure that all cables
and wires are connected properly. You may have difficulty powering on your system
if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please
find setup information and documentation online at our website or by calling your
vendor's support line.
40
http://www.tyan.com