Tenda nova MW Series Quick Installation Manual page 7

Package contents
• Mesh device x 3 (3-pack)/2 (2-pack)
• Power adapter x 3 (3-pack)/2 (2-pack)
• Ethernet cable x 1
• Quick installation guide x 1
Button/Port/Jack
The buttons, ports and jacks of the device may vary with models.
Button/Port/Jack
LAN port.
or
WAN/LAN multiplexing port, WAN port by default.
or
Power jack.
or
Reset button.
Reset or
For the reset method, refer to Question 3 of the FAQ.
Wall-mounting slot. Used to fix the device to the wall.
Recommended specifications are:
- Screws: PA3*14 mm; head diameter: 5.2 mm
-Plastic anchor: inner diameter: 2.4 mm; length: 26.4 mm
* The device is only suitable for mounting at heights ≤ 2m
Description
I Install the Tenda WiFi App
Download the Tenda WiFi App onto your mobile device by searching for Tenda
WiFi in App Store or Google Play or by scanning the QR code. Then install the
Tenda WiFi App.
II Connect the primary node
* The first node you set up functions as the primary node, while the rest are referred to as the
secondary nodes.
* If you do not use the modem for internet access, please skip step 1 and 3.
1. Power off your modem.
2. Use the included Ethernet cable to connect a LAN port of your modem or the
Ethernet jack to the WAN port of any node. This node is your primary node.
3. Power on your modem.
4. Power on the node, and wait until the LED indicator blinks green.
Internet
Modem
Ports and buttons are on the bottom (example: Mesh3)
Tenda WiFi
Power outlet
Or
Ethernet jack
01