Troubleshooting - Dometic OVN0250 Installation And Operating Manual

OVN0250, OVG0250
A
NOTICE!
• Hot surfaces could be damaged if they come into contact with cold
water or a damp cloth.
• Do not leave acid or alkaline substances (for example: vinegar, salt,
lemon juice) on appliance surfaces.
• Do not use abrasive, corrosive, chlorine-based products, scourers or
steel wool on the oven.
• Do not use rough abrasive material or sharp metal scrapers to clean
the glass oven doors as these products may cause the glass to
shatter.
• For cleaning, never use sharp cleaning agents or hard or pointed
tools.
• For stainless steel surfaces and enamelled parts: wash with soap and
water or mild detergent, rinse and dry. Use clean sponges and
cloths.
• Do not use steam cleaners to clean the device.
➤ Clean the oven regularly and when it gets dirty using a damp cloth.
➤ Allow the device to cool down before cleaning it.
➤ Remove oily and greasy residues.
➤ Wash the stainless steel or enamel surfaces with soap and water or a neutral
detergent.
➤ Rinse with clean water.
➤ Dry the surface.
9

Troubleshooting

!
WARNING!
Repairs to the gas-conveying parts of the device may only be carried out
by qualified specialists.
➤ Shut off the gas supply immediately if a fault occurs.
➤ Check for any damage to the device.
➤ Have a qualified specialist replace the damaged parts.
➤ Only use the device again once all the faults have been rectified.
EN
Troubleshooting
23